GRIN keebs 跡地GRIN keebs 跡地

[GB] GRIN Type-R

お一人様2個まで

想定していた注文数に達したため、GBを終了しました。生産・出荷の進捗状況については、こちらでお知らせします。(2021/11/8 02:50 JST) PCBおよび部材が到着し検品が完了しました。プレートの加工とハンダ付け作業をしています。(2021/11/28) 商品を発送しました。楽しみに待って下さりありがとうございました。(2021/12/21) GB has been closed as I have reached the expected number of orders. I'll keep you updated on the production and shipping progress here. (Nov. 8, 2021, 02:50 JST) PCBs and components have arrived and have been inspected. The plates are being processed and soldered. (Nov. 28, 2021) The product has been shipped. Thank you very much for waiting for it. (Dec. 21, 2021) こちら商品はGroup Buy(共同購入)になります。 BOOTHの海外発送はこちらをどうぞ! > https://www.tenso.com/jp/static/lp_shop_booth <<スケジュール>> Group Buyの開始: 2021/11/01 00:00(JST) Group Buyの終了: 2021/11/14 23:59(JST) 発送開始予定:2021/12 中旬以降 募集期間は早期終了または延期する可能性があります。 ※注意※ このキーボードは特殊なキー配列なので、一般的なキーキャップセットだとすべてのキーキャップが揃わないことがあります。 キー間の隙間が小さくなるように攻めた設計となっているためキー同士の軽い擦れが発生する事があります。ひどい場合、キー同士が物理的に干渉し打鍵に影響する可能性があります。事前にビルドガイドをよくご確認ください。 キーキャップはMX互換の19mmピッチ18mm角を想定しておりますが、互換性の保証はいたしかねます。 このキットはハンダ付けが必要です。 アルミプレートにはバリがある可能性があります。バリを取り除いてから組み立ててください。 また、アルミプレートはアルミ基板を流用しております。表面はアルミですが裏面はレジストの黒色となります。 出荷状態ではUSBストレージとして認識されます。セキュリティの厳しい環境ではお気をつけください。USBストレージを無効にする方法はビルドガイドを参照下さい。 This product is a Group Buy. Click here for BOOTH overseas shipping! > http://www.tenso.com/en/static/lp_shop_booth SCHEDULE Start of Group Buy: Nov. 1, 2021 00:00(JST) End of Group Buy: Nov. 14, 2021 23:59(JST) Scheduled start of shipping: Mid-December 2021 or later The application period may end early or be postponed. CAUTION! This keyboard has a special key layout, so a standard keycap set may not fill all the keycaps. Since the keys are aggressively designed to have a small gap between them, light rubbing between keys may occur. In severe cases, the keys may physically interfere with each other and affect the keystrokes. Please check the build guide carefully beforehand. Keycaps are assumed to be MX compatible with 19mm pitch 18mm square, but we cannot guarantee compatibility. This kit needs to be soldered. There may be burrs on the aluminum plate. Remove the burrs before assembly. The aluminum plate is made from an aluminum PCB. The surface is aluminum, but the back is resist black. In its factory default state, it is recognized as USB storage. Please be careful in high-security environments; see the build guide for how to disable USB storage.

想定していた注文数に達したため、GBを終了しました。生産・出荷の進捗状況については、こちらでお知らせします。(2021/11/8 02:50 JST) PCBおよび部材が到着し検品が完了しました。プレートの加工とハンダ付け作業をしています。(2021/11/28) 商品を発送しました。楽しみに待って下さりありがとうございました。(2021/12/21) GB has been closed as I have reached the expected number of orders. I'll keep you updated on the production and shipping progress here. (Nov. 8, 2021, 02:50 JST) PCBs and components have arrived and have been inspected. The plates are being processed and soldered. (Nov. 28, 2021) The product has been shipped. Thank you very much for waiting for it. (Dec. 21, 2021) こちら商品はGroup Buy(共同購入)になります。 BOOTHの海外発送はこちらをどうぞ! > https://www.tenso.com/jp/static/lp_shop_booth <<スケジュール>> Group Buyの開始: 2021/11/01 00:00(JST) Group Buyの終了: 2021/11/14 23:59(JST) 発送開始予定:2021/12 中旬以降 募集期間は早期終了または延期する可能性があります。 ※注意※ このキーボードは特殊なキー配列なので、一般的なキーキャップセットだとすべてのキーキャップが揃わないことがあります。 キー間の隙間が小さくなるように攻めた設計となっているためキー同士の軽い擦れが発生する事があります。ひどい場合、キー同士が物理的に干渉し打鍵に影響する可能性があります。事前にビルドガイドをよくご確認ください。 キーキャップはMX互換の19mmピッチ18mm角を想定しておりますが、互換性の保証はいたしかねます。 このキットはハンダ付けが必要です。 アルミプレートにはバリがある可能性があります。バリを取り除いてから組み立ててください。 また、アルミプレートはアルミ基板を流用しております。表面はアルミですが裏面はレジストの黒色となります。 出荷状態ではUSBストレージとして認識されます。セキュリティの厳しい環境ではお気をつけください。USBストレージを無効にする方法はビルドガイドを参照下さい。 This product is a Group Buy. Click here for BOOTH overseas shipping! > http://www.tenso.com/en/static/lp_shop_booth SCHEDULE Start of Group Buy: Nov. 1, 2021 00:00(JST) End of Group Buy: Nov. 14, 2021 23:59(JST) Scheduled start of shipping: Mid-December 2021 or later The application period may end early or be postponed. CAUTION! This keyboard has a special key layout, so a standard keycap set may not fill all the keycaps. Since the keys are aggressively designed to have a small gap between them, light rubbing between keys may occur. In severe cases, the keys may physically interfere with each other and affect the keystrokes. Please check the build guide carefully beforehand. Keycaps are assumed to be MX compatible with 19mm pitch 18mm square, but we cannot guarantee compatibility. This kit needs to be soldered. There may be burrs on the aluminum plate. Remove the burrs before assembly. The aluminum plate is made from an aluminum PCB. The surface is aluminum, but the back is resist black. In its factory default state, it is recognized as USB storage. Please be careful in high-security environments; see the build guide for how to disable USB storage.

ビルドガイド

GRIN Type-R の紹介

キット内容